Aptio Change Logo Utility
Download File >>>>> https://urllio.com/2tfkBg
AMIUCP is a utility that is used to pre-configure the Aptio Flash Utility (AFU). Users can insert and exchange the default command string and ROM image used in AFU to create a customized version of the utility. AMIUCP supports AFU v2.35 or AFUWINGUI v1.12 or later.
Good afternoon, Lords of great wisdom. My problem is the following: I bought a Chinese laptop with GN117_MB_V31-T board. (Aptio Setup Utility 2021) (There is no info for that board). And I want to change the logo of the bios. I have used Aptio_V Afuwin to do the bios Backup, then I change the logo with AMI ChangeLogo Tool v5.0.0.2 and everything seems perfect. But when you restart the new logo appears ok. But it automatically enters the bios, appearing a new option RECOVERY, ROM LAYOUT MISMATCH DETECTED - PARTIAL UPDATE IS NOT ALLOWED. If I give ESC it enters windows without problem but always enters the BIOS first, how can I solve that problem. Thank you very much for your help.
Hii would like to change my boot logoit s an AMI aptio 4 biosoem is ASUSit is using fancystart feature (don t know much about it and there s an app that should do this job but it does not run on my pc)Using mmtool 4.50 i found PostLogo and i extracted it as uncompressed, but this is not an image, or anyway it seems to be image + other Asus stuff (fancystart)There s a line \"PostLogo.pdb\", again, no info for this.My boot logo is the word ASUSThere s also an option to animate the logo with a fade effect. (probably the PostWave module in MMTool)I was only able to extract 2 images with the AMI logo but these images are not shown in gui or boot.Thanks 153554b96e
https://www.pawspetmarket.com/forum/pet-forum/ec-council-certified-secure-programmer-ebook-11
https://www.ewitches.com/forum/general-discussions/ultra-compresor-uharc-gui-64-bit